CHANGES OF PLANE
Corners & Junctions
Wall-to-wall and wall-to-floor junctions form changes of plane within the waterproofed shower and need deliberate detailing.
Water finds the smallest weak point.
Shower Waterproofing Canberra
Detailed Around Every
Junction & Penetration.
Shower waterproofing for new bathrooms, renovations and remedial work across Canberra. We focus on corners, niches, plumbing penetrations, drainage interfaces, thresholds and the surfaces beneath the finished shower.
New Shower
Waterproofing
Waterproofing
Shower Leak
Remedial Work
Remedial Work
Canberra &
Surrounding Areas
Surrounding Areas
SHOWER WATERPROOFING CANBERRA
A Shower Concentrates Water Into a Very Small Area.
Shower walls, floors, corners, drains, penetrations and recesses all come together within one continuously wet area. Those interfaces are where careful waterproofing detail becomes especially important.
The finished shower hides almost all of the waterproofing.
Waterproofing Needs to Follow the Shower — Not Just Cover the Floor.
Shower waterproofing extends beyond the obvious open surfaces. Changes of plane, recessed niches, pipe penetrations, screen interfaces, drainage points and thresholds can all interrupt the wet-area construction.
We approach the shower as one connected waterproofing system, considering the substrate and each relevant interface before the tiles and fittings conceal what sits underneath.
Continuous Wet-Area System
Walls, floor and detailed junctions need to work together.
Detailed Before Tiling
The critical waterproofing work is completed while the substrate is still accessible.
Built Around the Actual Shower
Niches, drains, penetrations and thresholds influence the waterproofing detail.
WHERE SHOWER WATERPROOFING GETS DETAILED
The Weak Points Are Usually Where Surfaces Change.
A flat wall or floor can be straightforward. The complexity begins where those surfaces meet other surfaces, fittings and drainage.
THROUGH THE MEMBRANE
Plumbing Penetrations
Shower outlets and plumbing connections interrupt the waterproofed surface and need to be incorporated into the system.
RECESSED DETAILS
Shower Niches
Niches introduce additional internal corners, horizontal surfaces and junctions within an area already exposed to regular water.
WHERE WATER LEAVES
Drainage Interface
The waterproofed floor and drain meet at one of the most important interfaces within the shower.
BENEATH THE FINISHED SHOWER
What Looks Simple After Tiling Has Detail Underneath It.
Once the shower is finished, the waterproofing around corners, niches and drainage is hidden. These interfaces need attention while the work is still visible.
WALL / FLOOR JUNCTION
Waterproofing Through the Change of Plane.
SHOWER NICHE
Extra corners inside the wet area.
THRESHOLD
Where the shower wet area changes.
SHOWER DRAINAGE
The Waterproofing Has to Meet the Drain Somewhere.
Water entering a shower is expected. The shower floor and drainage arrangement are intended to move that water toward the waste point, while the waterproofing protects the construction underneath.
That makes the drain interface part of the waterproofing system, rather than a completely separate component.
Follow the water all the way out.
Waterproofing and drainage meet at the point where collected shower water leaves the wet area.
FLOOR / FALLS / DRAINAGE
SHOWER PROJECT TYPES
New, Renovated or Already Leaking.
The waterproofing approach depends on whether the shower is being built from new, exposed during renovation or investigated because water is already appearing outside the wet area.
New Shower Waterproofing
New work allows the substrate, corners, penetrations, niches and drainage interfaces to be addressed before tiling conceals the waterproofing system.
Shower Renovations
Once existing tiles and finishes are removed, the condition of the substrate and previous waterproofing can be reviewed before the new shower is rebuilt.
Leaking Showers
Visible water outside the shower, deterioration or staining may be associated with water travelling behind the finished surfaces. The visible symptom does not always reveal the original entry point.
Remedial Waterproofing
Remedial work should respond to the actual condition of the shower, underlying substrate and existing waterproofing rather than simply covering the visible damage.
WHEN A SHOWER STARTS LEAKING
Water May Appear Somewhere Else First.
Moisture can travel through or behind adjoining construction before becoming visible. That is why the location of staining or damage does not always tell you exactly where the shower has failed.
Moisture outside the shower
Water appearing beyond the expected wet area warrants further investigation.
Swollen skirting or wall finishes
Moisture travelling behind the surface can affect nearby finishes before the source becomes obvious.
Recurring staining
Repeated staining can indicate an unresolved moisture pathway.
Previous repair has not solved it
A local surface repair may not address a broader failure within the waterproofing system.
Find the cause before hiding it again.
Remedial waterproofing should address the condition underneath, not simply the symptom you can already see.
OUR SHOWER WATERPROOFING APPROACH
Work Through the Details Before the Tiles Go On.
Each shower is different, but the waterproofing approach still needs to respond to the substrate, layout, junctions and drainage before the finished surfaces conceal the system.
Assess the Shower
Review the layout, substrate, existing condition and any signs of water movement.
Prepare the Substrate
Address the surfaces receiving the selected waterproofing system.
Detail the Junctions
Treat relevant corners, changes of plane and transitions.
Detail Penetrations
Incorporate plumbing penetrations, niches and other interruptions into the waterproofing system.
Build the Waterproofing
Apply the selected waterproofing system across the prepared shower.
Review Before Tiling
Check the completed work while all waterproofed surfaces and details are still visible.
SHOWER WATERPROOFING ACROSS CANBERRA
Every Shower Has Its Own Set of Details.
Shower layouts vary between homes, apartments, renovations and new construction. The number and position of niches, penetrations, thresholds, screens and drainage points all affect how the wet area needs to be considered.
We base the waterproofing approach on the actual shower and substrate rather than treating every wet area as identical.
SHOWER WATERPROOFING FAQS
Questions About Shower Waterproofing.
Common questions about shower membranes, leaking showers, drainage and wet-area detailing.
Do tiles and grout make a shower waterproof?
No. Tiles and grout form the finished surface. The waterproofing system is installed beneath those finishes.
What parts of a shower need waterproofing detail?
Relevant details can include corners, wall-to-floor junctions, plumbing penetrations, niches, drains, thresholds and other changes within the wet area.
Can a leaking shower be waterproofed again?
The appropriate remedial scope depends on the existing waterproofing, substrate, finishes and likely moisture pathway. The condition should be assessed before deciding how the shower needs to be repaired.
Why is the shower drain important to waterproofing?
The drain is where collected shower water leaves the wet area. The waterproofing and drainage interface therefore form part of the same overall shower assembly.
Can you waterproof a shower during a renovation?
Yes. Once the previous shower finishes are removed, the exposed substrate and existing waterproofing can be reviewed before the new shower is waterproofed.
Do you provide shower waterproofing outside central Canberra?
ACT Waterproofing services Canberra and surrounding areas. Send through the project location and shower details and we can confirm whether we can assist.
TALK TO ACT WATERPROOFING
Building or Repairing a Shower? Get the Detail Right Underneath.
Tell us whether the shower is new, under renovation or already showing signs of a waterproofing problem.
The tiles come later.
START YOUR ENQUIRY
Tell us about the shower.
New work, renovation or an existing leak.
Request a Shower Waterproofing Quote